Tails Face

Miles 'Tails' Prower's friendly face in a 32x32 fuse bead pattern. A perfect mid-size project for Sonic fans.

Sonic Rings Speedway Knuckles Head

32x32 gridMedium1024 beads15 colors

🐱Cute😎Cool

Materials Needed

1024 beads total · 15 colors

Buy the beads for this pattern

Top colors used in this pattern — tap a color to find matching beads:

As an Amazon Associate, FuseBeads Hub earns from qualifying purchases. Retailer links on this page may be affiliate links — they cost you nothing extra and help keep our patterns free.

Finish it into…

Turn your finished piece into something usable — each option needs only one or two extra supplies.

Keychain

Iron, then thread a key ring through an empty corner hole (leave one bead unplaced) and close with pliers.

Get keychain on Amazon →

Pin / badge

Iron fully solid on both sides, then hot-glue a pin back to the center.

Get pin / badge on Amazon →

Display piece

Iron both sides extra solid, prop it on a mini easel or frame it like pixel art.

Get display piece on Amazon →

🔥 Ironing card

Size: 32×32
Beads: 1,024
Heat: High (cotton/linen)
Time per side: 25–40s

A×594
FFB×89
1E1×85
F7F×60
5C4×40
646×32

Keep the iron moving in circles — never park it in one spot. Cover with parchment paper, iron one side, flip carefully, iron the other.

Fuzzy look? Iron slightly less on the pegboard side, then texture with a towel while still warm.

Colors & Technique: Tails Face

What makes the Tails Face chart manageable is color blocking: the 32×32 grid resolves into 6 clearly separated zones, led by deep dark Color1162. Lay each zone in beads first, then step back and check the borders — misaligned color boundaries are the most common flaw at this scale, and they are far easier to fix before ironing. Total build time lands around 20-40 minutes; difficulty is rated medium across 334 beads.

Where It Shines

Think of the Tails Face chart as a 20-40-minute project with a display payoff: the 32×32 grid, 334 beads and 6-color palette produce a piece with enough presence for a desk or shelf on its own. The deep dark zones photograph well under warm light — worth remembering if you share makes on social media. Pair with simpler sonic charts when teaching kids or running a craft night; mixed difficulty keeps a group engaged.

How to Make This Pattern — Step by Step

Supplies

•32x32 Fuse Bead Pegboard
•Ironing Paper
•Household Iron
•White × 594
•Light Orange × 89
•Black × 85

1
Place beads on a 32x32 pegboard according to the pattern grid.
2
Cover the design with ironing paper.
3
Iron on medium heat for 30-60 seconds with circular motions.
4
Flip and iron the other side.
5
Let cool under a heavy book.

Ironing Tips

💡Medium heat only — too hot and the beads over-melt and lose shape; too cool and they won't fuse.
💡Keep the iron moving in slow circles — staying in one spot melts that area flat.
💡Iron both sides and press under a heavy book while cooling to keep it flat.

FAQ

What bead colors do I need for Tails Face?▼

The Tails Face chart uses 15 colors; the full list with per-color bead counts is on this page above. Color1162 is the heaviest demand at 278 beads — check that shade first before starting.

Turn your own photo into a bead pattern

Upload any image for free and get a printable fuse bead pattern in seconds (PNG / PDF / CSV).

Make my pattern